HJG 7 LED CREE Projector Fog Lights | 140W Set of 2 | Round Design | White 6500K, Yellow 3000K and Warm White 4300K | Yellow Cover Included | for Bikes and Cars

HJG 7 LED CREE Projector Combo Fog Lights | 140W Set of 2 | Round Design | White 6500K, Yellow 3000K and Warm White 4300K for Bikes and Cars

The HJG 7 LED CREE Projector Combo Fog Lights come as a set of two round-design fog lights, each rated at 70W for a combined 140W total output. Each unit is built around a 7 LED configuration: 5 CREE LED chips and 2 projector lenses, producing a combined spot and flood beam for long-distance reach and wide-area road coverage simultaneously. Three colour modes cover all road and weather conditions: white at 6500K, yellow at 3000K, and warm white at 4300K. A yellow filter cover is included in the package. Compatible with motorcycles, cars, SUVs, and trucks on 12V DC systems.

Round Design

The round housing design gives each unit a compact and symmetrical profile that fits cleanly on front bumpers, grilles, bull bars, and roof racks. The round form factor suits both motorcycles and cars without looking oversized or mismatched on either vehicle type.

140W Output: 5 CREE LEDs and 2 Projector Lenses Per Unit

Each fog light uses a 7 LED layout: 5 CREE LED chips and 2 precision projector lenses. The CREE chips produce the wide flood spread across the road surface, while the dual projector lenses focus the beam straight ahead for long-distance reach. Both outputs run simultaneously from a single unit, covering both near-field width and far-field depth without switching modes.

Three Colour Modes: White 6500K, Yellow 3000K and Warm White 4300K

Three beam colour temperatures are selectable on each unit. White at 6500K for maximum road definition on clear nights. Yellow at 3000K for fog and rain, where the lower colour temperature reduces moisture scatter and improves road contrast on wet surfaces. Warm white at 4300K for balanced output in mixed or transitional weather. A yellow filter cover is also included for deeper yellow performance when needed.

Spot and Flood Beam Combination

The projector lenses deliver the spot beam for straight-line long-distance reach, while the CREE chips produce the flood beam for broad lateral coverage. Both beam types operate at the same time from a single unit, removing the need for separate spot and flood auxiliary lights on the same vehicle.

Precision Beam Alignment

The internal CREE chips and projector lenses are precision-aligned during assembly, producing a sharp, consistent beam pattern with no dark spots or irregular spread edges. The alignment holds under vibration, heat, and long-term use without shifting.

Advanced Cooling System and 100,000 Hour Lifespan

Each unit carries a high-speed cooling system paired with optimised heat dissipation built into the round housing. This keeps CREE LED junction temperatures stable during extended rides and continuous operation, maintaining brightness consistency and extending the rated lifespan up to 100,000 hours.

Waterproof and Dustproof Build

The construction is waterproof and dustproof, holding up reliably in fog, rain, mud, and off-road environments. The weather sealing on the round housing does not degrade under repeated outdoor exposure, keeping the internal LED assembly and beam quality intact.

12V DC Compatibility and Plug-and-Play Wiring

These fog lights run on 12V DC, making them directly compatible with motorcycles, cars, SUVs, and trucks on standard 12V vehicle electrical systems. The plug-and-play wiring setup connects to the vehicle's existing fog light or auxiliary circuit. Professional installation is recommended for correct mounting and safe wiring.

Complete Mounting Hardware Included

The package includes a full mounting kit covering all hardware needed for a secure fit. No additional hardware purchases are required for standard installation across supported vehicle types.

Mounting Options

These round fog lights can be fitted on front bumpers, grilles, bull bars, roof racks, or rear sections of a vehicle, functioning as direct replacements or additions for fog lights, auxiliary lights, or reverse lights depending on the mounting position selected.

Key Specifications

What Is in the Box

• 2 x HJG 7 LED CREE Round Projector Fog Lights (70W each)
• 2 x U-Clamps
• 2 x Large Mounting Clamps
• Nuts, Bolts and Washers

Frequently Asked Questions

How many fog lights are in this set?
This listing includes 2 round fog lights, each rated at 70W for a combined 140W total output.

What makes this different from other HJG fog lights?
This model features a round housing design with 5 CREE LEDs and 2 projector lenses per unit, producing a combined spot and flood beam in three colour modes.

What colour modes are available?
Three modes are available: white at 6500K, yellow at 3000K, and warm white at 4300K. A yellow filter cover is also included in the box.

What beam types does each unit produce?
Each unit produces a spot beam from the projector lenses and a flood beam from the CREE LEDs running simultaneously.

What voltage do these run on? They operate on 12V DC, compatible with motorcycles, cars, SUVs, and trucks on standard 12V systems.

What is the rated lifespan? The rated lifespan is up to 100,000 hours with the high-speed cooling system active during operation.

What hardware is included in the box?
The package includes 2 U-clamps, 2 large mounting clamps, nuts, bolts, and washers for a complete installation.

Where can these be mounted?
They fit on front bumpers, grilles, bull bars, roof racks, or rear sections as fog, auxiliary, or reverse light replacements.

Is professional installation needed?
Professional installation is recommended for correct beam alignment and safe wiring connections.