HJG Dual 3-Way 12V CNC Metal Motorcycle Handlebar Switch | 7/8” 22mm Alloy Control Switch for Headlight, Fog Light, Start, Horn, Turn Signal & Hazard

Upgrade your motorcycle's handlebar controls with the HJG Dual 3-Way CNC Metal Handlebar Switch, designed for motorcycles, motorbikes and scooters using a standard 7/8-inch (22mm) handlebar. Built with a CNC aluminum alloy body and metal mounting construction, this compact control switch provides convenient access to multiple electrical functions from the handlebar.

The switch is designed for 12V battery-powered installations and features a pre-wired harness for easier integration into suitable motorcycle electrical systems. Its control configuration can be used for functions such as headlight, fog light, spot light, electric start, horn, turn signal and hazard lighting, depending on the wiring configuration.

The CNC-machined metal construction, protective finish and compact clamp-on design make it suitable for riders looking for a durable aftermarket handlebar control solution.

Key Features & Benefits

CNC Aluminum Alloy Construction
The switch housing is made from CNC-processed aluminum alloy, providing a sturdy and durable construction for regular motorcycle use.

Dual 3-Way Switch Configuration
The product features two 3-way switches, allowing multiple electrical functions to be controlled from a compact handlebar-mounted unit.

12V Electrical Compatibility
Designed for 12V battery installations, making it suitable for compatible motorcycles, motorbikes and scooters.

7/8-Inch / 22mm Handlebar Fitment
The clamp is designed for standard 7/8-inch (22mm) motorcycle handlebars.

Multi-Function Control
Depending on the wiring setup, the switch can be used for controlling:

• Headlight High/Low Beam
• Fog Lights
• Spot Lights
• Electric Start
• Turn Signals
• Hazard Lights
• Horn

Pre-Wired Harness
The switch includes a bundled wiring harness with approximately 50cm wire length, helping simplify installation on compatible electrical systems.

Water & Shock Resistance
The switch is designed with resistance to water exposure and vibration, making it suitable for everyday motorcycle environments.

Protective Anodized Finish
The CNC aluminum alloy body is processed with an anodic finish designed to provide a durable surface that is less prone to peeling during normal use.

Dual 3-Way Metal Switch Design

The HJG switch uses a two-switch, three-position control configuration. The switches can be used for different electrical accessories depending on how they are wired into the motorcycle.

This makes the unit useful for riders who want to operate additional lighting or electrical accessories without installing several separate switches around the handlebar.

The actual function of each switch depends on the wiring configuration and connected accessory.

Product Specifications

Compatible Applications

The HJG Dual 3-Way Handlebar Switch is designed for compatible 12V motorcycles, motorbikes and scooters with a 7/8-inch (22mm) handlebar.

It can be used for controlling suitable:

• Motorcycle LED headlights
• Fog lights
• Auxiliary lights
• Spotlights
• Headlight functions
• Turn indicators
• Hazard lights
• Horn circuits
• Other compatible 12V accessories

Before installation, confirm the accessory's voltage, current requirement, switch wiring and handlebar dimensions.

Headlight & Auxiliary Light Control

One practical application of this metal switch is controlling additional motorcycle lighting.

It can be integrated into suitable circuits for:

Headlights:
Use the switch configuration for compatible high/low-beam control.

Fog Lights:
Connect the appropriate circuit to operate compatible 12V motorcycle fog lights.

Spot Lights:
The switch can be incorporated into an auxiliary spotlight circuit where the electrical load is within the switch's rated capacity.

Additional Accessories:
The dual-switch configuration provides flexibility for other compatible 12V electrical accessories.

For higher-current accessories, use an appropriately rated relay and fuse rather than routing excessive current directly through the handlebar switch.

Installation Notes

1. Turn off the motorcycle and disconnect the battery before wiring.
2. Confirm that the handlebar diameter is 7/8 inch / 22mm.
3. Position the switch in a comfortable and accessible location.
4. Secure the clamp using the supplied mounting arrangement.
5. Identify the function of each wire before making electrical connections.
6. Connect the switch to the appropriate 12V circuit.
7. Use a suitable fuse for the connected accessory.
8. For high-power lights, use a relay-based wiring setup where required.
9. Secure the approximately 50cm wiring harness away from moving and hot components.
10. Reconnect the battery and test each function individually.

Important: Wiring colors and functions can vary by motorcycle and installation. Always verify the circuit before connecting power.

Electrical Protection

The product information specifies multiple protection features, including:

• Output circuit protection
• Overload protection
• Reverse-polarity protection
• Multi-level electrical protection

These features are intended to provide additional protection during suitable installations, but an appropriately rated fuse should still be used in the vehicle's accessory circuit.

Durability & Construction

The CNC aluminum alloy housing is designed for repeated use in motorcycle environments. Its metal construction provides a solid alternative to lightweight plastic-only control switches.

The anodized surface treatment is designed to improve finish durability, while the switch assembly is specified for resistance against water exposure and vibration.

Maintenance & Care

• Keep the switch surface clean and free from excessive dirt.
• Inspect the mounting bolt periodically.
• Check wiring for cuts, loose connections or exposed conductors.
• Make sure the switch remains firmly attached to the handlebar.
• Avoid directing high-pressure water directly at electrical connections.
• Inspect connectors after riding in heavy rain or washing the motorcycle.
• Do not exceed the specified 16A rated current.

Why Choose the HJG Dual 3-Way Metal Switch?

The HJG Dual 3-Way 12V CNC Metal Motorcycle Handlebar Switch provides a compact way to manage multiple electrical functions from a single handlebar-mounted control unit.

With its CNC aluminum alloy construction, 7/8-inch fitment, 12V compatibility, dual 3-way configuration, approximately 50cm wiring and multi-function application, it is suitable for motorcycle lighting and accessory projects where a durable metal switch is preferred.

For related motorcycle lighting, wiring and accessories, explore Dug Dug Motorcycles.

Package Includes

• 1 × HJG Dual 3-Way CNC Metal Motorcycle Handlebar Switch
• Integrated wiring harness