HJG Original 140W Minus Light Fog Lights | Set of 2 | White, Yellow and Filter Cap | 4000 Lumens | 12V-85V | Bike and Car

The HJG Original 140W Minus Light LED Fog Lights come as a set of two, each rated at 70W for a combined 140W total output and up to 4000 lumens combined brightness at 6000K. Each unit delivers a spot and flood beam combination in white and yellow modes, with a yellow filter cap included for additional low-visibility performance. Built from aviation-grade aluminum with efficient heat sinks, these lights are water-resistant and dustproof and operate on a wide 12V to 85V DC range. Compatible with motorcycles, cars, jeeps, SUVs, trucks, and ATVs. Yellow filter caps and adjustable stainless steel mounting brackets are included in the package.

Minus Light Design

The minus light form factor gives each unit a distinctive slim, flat-face profile that mounts cleanly on front bumpers, bull bars, lower bumper openings, grilles, roof racks, and rear bumpers. The compact shape suits motorcycles, cars, jeeps, and SUVs without adding excessive bulk to the mounting area.

140W Output and 4000 Lumens at 6000K

At 70W per unit and 140W combined, these fog lights produce up to 4000 lumens of brightness at 6000K, delivering a crisp and focused white light output across both the spot and flood beam pattern. The high-intensity LED chips with advanced lens design cover long-distance forward reach and wide lateral road spread simultaneously from a single compact unit.

Dual-Colour Modes: White and Yellow with Yellow Filter Cap

Two beam colour modes are selectable on each unit. White mode for clear night driving with maximum road definition. Yellow mode for fog, rain, and dusty environments where the warmer colour temperature reduces scatter and improves road contrast on wet surfaces. The included yellow filter cap fits over the lens to deepen the yellow output further in extreme low-visibility conditions.

Spot and Flood Beam Combination

The spot beam delivers focused long-range forward reach on highways and open roads, while the flood beam spreads light across a wide lateral area for urban and low-visibility driving. Both outputs run simultaneously from a single unit, covering near-field width and far-field depth without requiring a separate auxiliary light setup.

Aviation-Grade Aluminum with Heat Sinks

Each unit is constructed from aviation-grade aluminum with efficient heat sinks integrated directly into the body. The aviation-grade material provides a stronger and lighter housing than standard die-cast aluminum, while the heat sink design draws heat away from the LED chips during continuous operation, keeping temperatures stable and maintaining consistent brightness across extended use.

Water-Resistant and Dustproof Build

The water-resistant and dustproof construction ensures consistent performance in rain, fog, mud, off-road conditions, and extreme weather environments. The sealing holds up under repeated outdoor exposure without affecting the internal LED assembly or beam output quality across the rated lifespan.

30,000 Hour Lifespan

The efficient heat sink cooling system paired with the aviation-grade aluminum body maintains stable LED operating temperatures during continuous use, supporting a rated lifespan of over 30,000 hours without significant brightness degradation or component failure.

Voltage Range: 12V to 85V DC

These fog lights operate on a wide 12V to 85V DC input range, making them directly compatible with motorcycles, cars, jeeps, SUVs, trucks, and ATVs across both standard 12V and higher-voltage vehicle electrical systems. They can also be used for outdoor or auxiliary applications with an appropriate converter and correct wiring setup.

Adjustable Stainless Steel Mounting Brackets

The package includes adjustable stainless steel mounting brackets for precise beam angle adjustment after installation. The stainless steel construction resists rust and corrosion in outdoor conditions, maintaining bracket rigidity and beam direction under road vibration and prolonged exposure.

Mounting Options

These minus light fog lights can be fitted on front bumpers, bull bars, lower bumper openings, grilles, roof racks, or rear bumpers of a vehicle, functioning as direct replacements or additions for fog lights, tail lights, or reverse lights depending on the mounting position selected.

Fitment and Installation

Compatible with motorcycles, cars, jeeps, SUVs, trucks, and ATVs. Wiring connects to the vehicle's existing 12V to 85V DC auxiliary or fog light circuit. Also suitable for outdoor or auxiliary lighting applications with an appropriate converter. Professional installation is recommended for correct beam alignment and safe wiring connections.

Key Specifications

What Is in the Box

• 2 x HJG Original Minus Light LED Fog Lights (70W each)
• Yellow Filter Caps
• Adjustable Stainless Steel Mounting Brackets

Frequently Asked Questions

How many fog lights are included in this set?

This listing includes 2 fog lights, each rated at 70W for a combined 140W total output and up to 4000 lumens combined brightness.

What is the minus light design?

The minus light design refers to the slim, flat-face form factor of each unit. It provides a compact, low-profile housing that mounts cleanly on bumpers, bull bars, grilles, and roof racks without adding excessive bulk to the vehicle.

What does the yellow filter cap do?

The yellow filter cap fits over the lens of each unit to deepen the yellow light output beyond the standard yellow beam mode. It is particularly useful in extreme fog, heavy rain, and dusty road conditions where deeper yellow penetration improves road contrast further.

What are the two beam colour modes?

The two modes are white for clear night driving with maximum road definition, and yellow for fog, rain, and dusty environments where warmer colour temperature reduces moisture scatter and improves wet road contrast.

What is the voltage range?

These fog lights operate on 12V to 85V DC, covering motorcycles, cars, jeeps, SUVs, trucks, and ATVs across both standard 12V and higher-voltage electrical systems.

What vehicles are these compatible with?

They fit motorcycles, cars, jeeps, SUVs, trucks, and ATVs using the vehicle's existing auxiliary or fog light circuit.

Can these be used for outdoor or auxiliary lighting?

Yes. They can be used for outdoor or auxiliary lighting applications with an appropriate voltage converter and correct wiring setup for the target installation.

Where can these fog lights be mounted?

They fit on front bumpers, bull bars, lower bumper openings, grilles, roof racks, or rear bumpers as replacements or additions for fog lights, tail lights, or reverse lights.

What is the rated lifespan?

The rated lifespan is over 30,000 hours with the aviation-grade aluminum heat sink system active during continuous operation.

Is professional installation needed?

Professional installation is recommended for correct beam alignment and safe wiring connections.