HJG W28 4-Lens CREE 60W Square LED Fog Light with Ultra-Wide White Beam for Cars and Bikes (Single Piece)

The HJG W28 4-Lens CREE 60W Square LED Fog Light pushes 60W of power through four CREE LED projector lenses arranged in a square-edge housing, producing approximately 1500 lumens of 6000K bright white light. The spot and flood beam combination throws a long-range focused center beam while spreading wide enough to cover the full road surface on both sides.

This is a single-purpose, high-output fog light built for riders and drivers who need raw brightness and wide coverage without RGB modes or color switching.

What's in the Box: 1 x HJG W28 4-Lens CREE LED Fog Light (60W), Adjustable Mounting Brackets

Product Specifications:

• Model: HJG W28
• LED Type: CREE
• Lens Count: 4 lenses, square-edge design
• Power Output: 60W
• Brightness: Approximately 1500 lumens
• Color Temperature: 6000K (white)
• Beam Pattern: Spot and flood combination
• Voltage Range: 9V to 32V DC
• Lifespan: 50,000+ hours
• Body Material: Aviation-grade aluminum housing
• Mounting Hardware: Adjustable stainless steel brackets
• Weather Protection: Waterproof and dustproof
• Quantity: Single piece
• Compatibility: Motorcycles, cars, SUVs, trucks, Jeeps, ATVs, and other 9V to 32V DC vehicles

4-Lens CREE LED Array

Each of the four CREE LEDs sits behind its own dedicated lens, creating four individual beam channels that merge into one ultra-wide, tightly focused output. The CREE chips are rated for higher luminous efficiency than standard LEDs, meaning you get stronger brightness per watt with less heat buildup and lower battery draw.

Spot and Flood Combo Beam

The beam pattern combines a concentrated spot center for long-distance reach with a flood spread that lights up the road surface, shoulders, and peripheral zones. This dual pattern means you get both distance and width from a single fog light without needing separate spot and flood units.

6000K Bright White Output

The 6000K color temperature produces a crisp, daylight-tone white beam that picks up road markings, obstacles, and surface changes clearly. There is no yellow tint or blue shift, just a clean white output that holds steady across the full lifespan of the LEDs.

Aviation-Grade Aluminum Housing

The body is built from aviation-grade aluminum, a step above standard die-cast aluminum in terms of strength-to-weight ratio and heat handling. The housing absorbs road vibration, resists corrosion from rain and salt, and takes direct impact without cracking or warping.

Built-In Heat Sink System

A dedicated heat sink integrated into the aluminum housing pulls heat away from the CREE chips continuously. This keeps the LEDs running at optimal temperature even during extended night rides, preventing brightness loss and supporting the rated 50,000+ hour lifespan.

Waterproof and Dustproof

The sealed construction blocks out water, mud, fine dust, and road debris. Whether you are riding through monsoon rain, dusty highways, or muddy off-road tracks, the internals stay dry and the beam stays clear with no fogging or moisture damage.

Voltage and Vehicle Compatibility

Operates on 9V to 32V DC, covering 12V motorcycles and cars, 24V trucks and commercial vehicles, as well as Jeeps and ATVs. No voltage converter or additional relay needed for standard installations.

Mounting Options

Ships with adjustable stainless steel mounting brackets that allow precise angle positioning. You can install it on:

• Bumpers and grills
• Bull bars and crash guards
• Roof racks
• Rear sections as a reverse or backup light

Works as a fog light, auxiliary driving light, reverse light, or additional lamp depending on your mounting position and wiring setup.

Battery and Power Efficiency

The 60W draw is optimized against the 1500-lumen output, meaning the fog light delivers strong brightness without putting excess load on your vehicle's electrical system. This matters on motorcycles and smaller vehicles where battery capacity is limited.

Why Riders Pick the HJG W28 4-Lens CREE:

• 4 CREE LED lenses in a square-edge design for maximum beam focus
• 60W power output delivering approximately 1500 lumens at 6000K
• Spot and flood combo beam for both long-range throw and ultra-wide coverage
• Aviation-grade aluminum body with built-in heat sink system
• 9V to 32V DC range covering bikes, cars, SUVs, trucks, Jeeps, and ATVs
• 50,000+ hour lifespan with active thermal management
• Waterproof and dustproof sealed housing for all-weather riding
• Adjustable stainless steel brackets for bumper, grill, bull bar, roof rack, or rear mounting
• Energy-efficient operation with low battery drain relative to output

Note: Professional installation is recommended for proper beam alignment and secure wiring. Product is inspected before dispatch.